Machine FeaturesStandard FeaturesTechnical InformationVideoDocuments
Single Spindle Drilling Line
Meteor 1200
The AKYAPAK METEOR-1200 has been designed to drill any type of profile by rotating the beam. Tight tolerance between holes is no longer an issue since steel manufacturers want more accurate fabrication and assembly in less time. Because time is of the essence, METEOR-1200 is prepared to reduce your labour requirements for drilling or on-site assembly. METEOR-1200 is equipped to drill beams, angles, flat sheets, and other shapes. With a cutting-edge control system, you can mill slots, pockets, and any geometry.
Ready to drill beams, angles, flat sheets, and any other appropriate geometry. With a cutting-edge control system, you can mill slots, pockets, and any shape.
METEOR-1200 gives you advantages;

Clamping System
The cabinet and work piece are clamped using two cylinders. The upper clamp cylinder tightly clamps the component to prevent movement during processing. The lower cylinder secures the cabinet to the support table. The item and cabinet are therefore tightly attached during the processing.
Mechanical compression prevents the component from moving mechanically.
Media Gallery






Standard Features


