CNC Hydraulic Press Brakes
Moderate and Prestige Models Available

Standard Features
CYBELEC / STEPAUTOMATION / ESA / DELEM Controllers
DSP / AKAS laser Safety System or Light Guard System
Promecam Type Hydraulic / Pneumatic top and bottom clamping system
Manual and CNC Controlled mototized crowning system (C Axis)
Oil heater / Cooler
Additional backgauge finger blocks and front support arms
Rear Light Guard
Promecam quick release clamping system
Front sliding support system with flip flop
Portable control panel for operator
Foot pedal confirming EC regulation
Emergency stop buttons


STEP AUTOMATION SA10 / SA12 / SA15
The perfect solution for every need;
SA touch series CNC offers a versatile range of solutions and is able to meet all the demands of bending.
Easy to handle, intuitive and practical.
Successfully controlling precision and productivity.
Full compatibility.
CYBELEC CYBTOUCH 12
ModEva Pac and Cybtouch 12 is a natural evolution of Cybelec’s famous numerical controls.Its the latest evolution of the Cybelec’s user interface empowers the operator to interact in a quick,convenient and more efficient manner with his machine, ultimately increasing his productivity.
- 4 axes control (Y1-Y2-X-R).
- TouchProfile 2D graphic part creation with manual sequencing.
- Bend allowance calculation.
- Pressure – crowning calculation.
- Modulable tools for each part or bend.
- Punch depth calculation.
- Angle and back gauge correction.
- Delivered with PC-ModEva offline software.
- Large touchscreen, with vivid colors and high-contrast.
- Hand drawing TouchProfile function.
- Simple pages, clear display, large keys.
- Intuitive and user-friendly interface.
- Complete programming for efficient mass-production with multiple bends.
- Easy single bends thanks to the EasyBend page.
- Online help and interactive warning pop-up.
- Comfortable wireless software updating and data back-up using PC or Notebook.


CYBELEC MODEVA PAC
ModEva Pac and Cybtouch 12 is a natural evolution of Cybelec’s famous numerical controls.Its the latest evolution of the Cybelec’s user interface empowers the operator to interact in a quick,convenient and more efficient manner with his machine, ultimately increasing his productivity.
- Graphic 2D display and simulation capability displaying optimal bending sequences, tools and position of the sheet between the tools.
- Collision detection according to criteria defined by the operator:
— Minimum length against the operator.
— Minimum return.
— Maximum accuracy between two defined faces.
— Minimum operator manipulation. - Windows XPe for multitasking and file management.
- EC safety-cycle management.
- Easy communication:
— Windows networking through Ethernet (RJ45).
— Connection to external devices through USB port for software updating and data backup.
— Remote maintenance. - Almost unlimited quantity of programs and very high number of sequences.
- Over 20 languages available
Quick Release Top Tool Clamping System
Quick Release Top tool clamping system allows you to change your top tools without losing time.


Crowning System
Manual or CNC Controlled motorized crowning systems simplifies bending by adjusting (manual or automatically ) each point of the bending parts to get excellent bending result.

Optional Features
CYBELEC / STEPAUTOMATION / ESA / DELEM Controllers
DSP / AKAS laser Safety System or Light Guard System
Promecam Type Hydraulic / Pneumatic top and bottom clamping system
Manual and CNC Controlled mototized crowning system (C Axis)
Oil heater / Cooler
Additional backgauge finger blocks and front support arms
Rear Light Guard
Request a Quote










Standard Features
Standard 3 Axes (Y1, Y2, X) Manual R axis
Cybelec CybTouch12 2D / StepAutomation SA12 2D grafical control panel
Bosch Rexroth / Hoerbiger hydraulic system
Front light guard protection system
Photocell rear guard
Side doors with switch
European type segmented top and bottom tool system
Promecam quick release clamping system
Front sliding support system with flip flop
Portable control panel for operator
Foot pedal confirming EC regulation
Emergency stop buttons
Electrical cabinet confirming EC regulation
Manüel crowning system (300 ton machines)
Motorized crowning system (400 ton and over 6 meter machines)

Control Units
ModEva Pac and CybTouch 12 is a natural evolution of Cybelec’s famous numerical controls.Its the latest evolution of the Cybelec’s user interface empowers the operator to interact in a quick, convenient and more efficient manner with his machine, ultimately increasing his productivity.
CYBELEC MODEVA PAC

CYBELEC CYBTOUCH 12

The New generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes.Ease of use combined with state of the art technology go hand in hand, improving productivity.The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production.
DELEM 58T

DELEM 69T

STEP AUTOMATION SA10 / SA12 / SA15
The perfect solution for every need; SA touch series CNC offers a versatile range of solutions and is able to meet all the demands of bending.
Easy to handle, intuitive and practical.
Successfully controlling precision and productivity.
Full compatibility.


STEP AUTOMATION ROCK SERIES
Scheduled Maintenance Management for a machine always efficient
Advanced programming assisted by attachments and video
Sampling of the material for an accurate production
Exporting of computed flat patterns as DXF files
Tools and parts import from CAD
3D Simulation with automatic best bend sequence identification with collision detection
Automatic tool selection and machine tooling
Advantages of Start Stop Series
The Start – Stop Series Press Brakes are more eco-friendly using %40 less energy than a classic press brakes.
The Start-Stop Series Press Brakes can last 2x than classic press brakes.
The Start-Stop Series Press Brakes can produce less Noise(63db) than classic press brakes.
The Start-Stop Series Press Brakes’ oil tanks do not heat up because of start-stop engine technology.



Optional Features
CYBELEC / STEPAUTOMATION / ESA / DELEM Controllers
DSP / AKAS laser Safety System or Light Guard System
Promecam Type Hydraulic / Pneumatic Top and Bottom Clamping system
WILA Type Hydraulic / Pneumatic / Mechanical Top and Bottom Clamping system
CNC controlled Motorized Crowning (C Axis)
Oil Heater / Cooler
Automatic Rear Sliding Doors
Additional Backgauge Finger blocks and Front Support Arms
Rear Light Guard
Please contact for more details
Request a Quote


























