Han's Laser · HW Series
HW-D · Handheld Fiber Laser Welding
Review the HW-D for your material, joints and production needs. Confirm the supplied model, accessories and installation scope in writing, then assess representative sample welds against your acceptance criteria.
Power of Interest — Confirm Configuration
Functions and Accessories
Welding is the core application. Confirm compatible equipment and demonstrate any additional cleaning or cutting task before ordering.
Assess the proposed welding process on actual sample joints.
If cleaning is offered, review the coating, substrate and extraction requirements.
If cutting is offered, test the intended job. Do not assume it replaces a dedicated sheet laser.
Engineering & Design
Every element of the HW-D is designed for real-world industrial use — from the ergonomic gun head to the intelligent cabinet HMI.
Establish oscillation settings through sample trials; wobble does not guarantee a defect-free joint.
Handle the proposed torch during a demonstration. Assess access, balance, cable routing and operator work positions.
Review controls and parameter management on the proposed unit. Document settings established for your parts.
Ask for a demonstration of positioning aids and the start sequence. Inspect weld starts and stops.
Confirm available output modes on the quoted configuration and demonstrate the intended application.
Confirm wire sizes, materials and feeder options. Establish filler requirements for the joint design.
Request the manual and a review of supplied safety features. Plan the work area, protective equipment and training with a qualified laser-safety professional before use.
Check the installation drawing, utilities, cooling and cable routing for the supplied unit.
Agree on training, supervised practice and acceptance checks. Stored parameters do not replace application qualification or training.
Application review
Send material grades, thicknesses, joint drawings and acceptance criteria. Ask about demonstration availability and compare preparation, welding and finishing together.
Request a sample-weld discussionPrepare a consistent comparison before requesting proposals.
Read the quote checklistTechnical Data
Reference: Han's Laser HW-D page, reviewed October 14, 2026. Its material-specific table differs from its general thickness range; neither is treated here as a universal capacity guarantee.
HW-D Series
Manufacturer reference only; confirm the specification supplied for your order.
| Parameter | Reference / confirmation needed |
|---|---|
| Published power options | 1,000 / 1,500 / 2,000 W |
| Published wavelength | 1,070 nm |
| Published oscillation range | 0–5 mm |
| Published fibre length | 10 m standard |
| Published cooling | Water cooling |
| Output modes | CW / pulse described by the manufacturer |
| Material and thickness | Confirm grade, joint and acceptance criteria through sample review. |
| Site requirements | Obtain the supplied-unit installation drawing and electrical requirements. |
| Accessories | Confirm torch, feeder, nozzles and any cleaning/cutting equipment in writing. |
| Documentation | Request the model-specific datasheet, manual and applicable approval documents. |
Material Compatibility
The manufacturer lists these materials. Confirm the exact grade, thickness and joint requirements for your supplied configuration.
Industry Applications
Use representative drawings and acceptance requirements to decide whether this handheld system suits the job.
Quotation Scope
Request an itemized quotation covering equipment, accessories, site preparation, training and exclusions.
Common Questions
We respond within 1 business day.
We'll be in touch within 1 business day with pricing and availability for the HW Series.