Polar Sanding Equipment branding illustration

A CANADIAN BRAND · POLAR FINISHING EQUIPMENT

METAL SANDING.
A POLAR FINISH.

Glide · Force · Fusion

Metal sanding equipment for Canadian fabrication shops. Find the right machine, head arrangement and finish for your work.

Branding illustration. Final machine configuration and appearance confirmed with your quotation.

01 GLIDE · Light duty
02 FORCE · Heavy duty
03 FUSION · Combination head
Find your fit

Choose your Polar.

Start with the application, then confirm the configuration, sample results and delivered scope.

Choose by application

Which Polar fits your work?

ModelApplication focusWhat to confirm
Polar GlideLight-duty surface sanding and finishingMaterial, incoming surface, required finish and selected abrasive arrangement.
Polar ForceHeavier-duty sanding applicationsRemoval requirement, part handling, duty cycle and results on representative parts.
Polar FusionCombination-head sanding and finishingHead sequence, abrasives, target appearance and whether additional passes are required.

Working width, thickness range, feed speed, electrical supply, wet or dry processing and extraction are configuration-specific. Confirm these in the written quotation; a model name alone does not establish capacity or included equipment.

Original catalogue photography

Outside and inside the sanding process.

Interior photographs show example metal-sander arrangements. Head count, drive layout and brush equipment vary by configuration.

The sanding process

Top, bottom and combination heads.

Catalogue diagrams of top sanding A-A and A-A-A heads and bottom sanding A and A-A heads

Choose the face and the sequence.

The metal-sander catalogue illustrates top sanding with two or three roller heads and bottom sanding with one or two roller heads. These are alternative machine arrangements; a top-sanding machine does not automatically include bottom sanding.

A roller head uses an abrasive belt over a contact roller. Brush or disc stages are selected separately around edge treatment, surface appearance and part geometry. For two-face work, confirm whether the proposed process uses separate machines, a dedicated line or part reversal.

Discuss your head configuration ↗
Tooling choices

Match the brush to the finish.

Original catalogue tooling photographs. These are selection options, not a statement that every brush is included or fits every Polar model.

Abrasive-cloth brush

Abrasive-cloth brush

Abrasive flaps with supporting fibres. Specify the abrasive, grit and required surface treatment.

Disc brush

Disc brush

A disc-format tool for a compatible brushing station. Confirm part holding and the desired edge result.

Nylon brush

Nylon brush

A catalogue-listed brush format. Confirm filament type and compatibility with the work material.

Wire brush

Wire brush

Select wire type and material compatibility; agree on acceptable marking and contamination controls.

Non-woven brush

Non-woven brush

A non-woven abrasive format for evaluating blending and finishing requirements.

Fibre brush

Fibre brush

A fibre-bristle format. Confirm its cleaning or finishing role in the selected machine.

Start with your parts

Let’s define your finish.

Bring your material, part dimensions, incoming condition and target finish. We’ll use those details to discuss the machine and quotation scope.

Discuss your application ↗
RISE TEK · POLAR FINISHING EQUIPMENT

Get your Polar quotation.

Choose your machine and tell us how to reach you.

Rise Tek will use these details to respond to your enquiry. Privacy policy