Request Quote


Drilling and Oxy-fuel/Plasma Cutting Machine


Drilling and Oxy-fuel/Plasma Cutting Machine


Drilling and Oxy-fuel/Plasma Cutting Machine

Machine FeaturesSpecificationsVideoDocuments

Drilling and Oxy-fuel/Plasma Cutting Machine


The Bridge Between Operations

With its latest model in the CNC hole drilling, marking, and cutting lines in its product line, which can only be created by a handful of manufacturers worldwide, Akyapak is on the market with the APLG-Akyapak GANTRY Hole Drilling and Oxygen/Plasma Cutting Machine.

ADOP is made to drill, cut, and mark in order to maximize efficiency while balancing adaptability and precision. The cutting unit is located on the other side of the bridge, and the drill unit is installed on the heavy-duty double linear guides on the heavy steel bridge frame. Ball screws operated by servos ensure precise horizontal axis movements for drilling and cutting devices.

Layout marking can be carried out by inserting a tool into the 10-station automatic tool changer (atc), which is offered as standard. Additionally offered as standard features are oxy and plasma cutting. Using a plasma torch is required to achieve the greatest cutting results. A highly efficient fume extraction equipment can be used to remove and filter the dust and fumes produced throughout the process. Hydraulic gripping jaws mounted on two linear guides enable precise positioning of the plates. Servo motors with a rock and pinion system power feeder trucks.

Media Gallery


  • Entire system control: CNC (Mitsubishi or Siemens)

  • Spindlemotor and all axial engines: Servomotor

  • Spindlemotor: 22 kW / 140 Nm | 30 HP / 103 lbf.ft

  • Spindlemotor Torque: 280 Nm | 206 lbf.ft

  • Drilling capacity: 10 – 40 mm | 23/8″ – 1-9/16″

  • Screw cutting capacity: max. M24Screw cutting capacity: max. M24

  • Inner cooling carbide drill usage: Yes

  • Set inner cooling: Standard, pulverized pressed air and boron water (carbide yip drills)

  • Spindle and Cutting Units Movement Bedding (horizontal / vertical): Preloaded linear units

  • Marking by scrapping: Yes

  • Automatic tool changing unit: Yes

  • ATC Capacity: 6 Tools

  • Plate positioning weight: max. 7.500 kg | 16.500 lbs

  • Suitable sizes: 3000*3200*100 mm 3000*12000*26 mm | 9,8′ x 10,5′ x 4″ 9,8′ x 40′ x 1″

  • Plasma cutting capacity: max. 60 mm (30 mm by exploding) | max. 2-1/2″ (1-1/4″ piercing)

  • Oxy and plasma slag and powder collection plate: Yes

  • Oxy and plasma powder filtration unit: Yes

  • Rasping collection plate (wheeled): Yes

  • Plate application system: Servo-engine + Reductor / Pinion + Krameyer gearing system

  • Plate blockage: Hydraulic remote controlled extrusion jaws

Request a Quote