Request Quote


7 Axis Three Spindle CNC Drill Lines

Machine FeaturesStandard FeaturesTechnical InformationVideoDocuments

7 Axis Three Spindle CNC Drill Lines


Except for the addition of z axes to the x and y axes on 3 ADM, all 3ADM ECO systems are the same as 3 ADM. After single line drilling, the beam on 3 ADM ECO is driven and transported to the next drilling location. However, as with 3 ADM, beams can be drilled without driving them the whole 500 mm length of the beam.

D.O.T. (Optional)

The servo motor drives the marking unit, as well as the rotational and axial progress motions. Only the blocking clamp jaw and the blocking clamp jaw table have hydraulic motions.

It is possible to designate the field 60150 mm. Letter height is 12 mm.

There is no need to move the profile while marking. Because the marking head performs both rotational and axial progress. The hydraulic cutting adjustment determines the power of the marking head press.

Scribing Marking Unit (Optional)

ATC comes with a typical set of marking units. It revolves at 18,000 rpm under 6 bar air pressure and marks with a carbide insert on the tip. The marking depth may be changed to any desired depth, and the altered depth is assured by the marking unit’s +/- 7.5mm offset.

Media Gallery

Standard Features

  • Control Panel: Mitsubishi

  • Drilling Unit- Vertical: 1 Vertical

  • Drilling Unit- Horizontal: 2 Horizontal

  • Drilling diameter: 10-40 mm

  • Spindle Speed-Infinitely: 50-3000 d/min.

  • Drive Power Per Axis: 22 kW / 140 Nm

  • Spindle torque: 280 Nm

  • Movement Transmission System: Preloaded ball screws / nut system

  • Automatic Tool Changing Unit: For each spindle one ATC with 4 tools

  • Infeed Table with CNC Carriage: 12m

  • Exit Table with Motorized Rolls: 12m

  • Central Lubrication for Linear Guides: Standard

  • Tool Cooling System: MQL

  • Weight of Linear Meter: 600 kg/m

  • Tapping Tool for all three axes (Optional): M10 – M24 (with special set)

  • Beam Width max-min with support from down:

  • Beam Height max-min: 500/80 mm

  • Spindle Head Tool Shafts-hole: BT 40 (with cooling liquid long hole)

  • Workpiece movement: Servomotor + planetery gear box

  • Automatic Cross-Section Measuring: Standard

  • Miter Band Saw Machine Integration: Optional

  • Weight: 11000 kg

  • Dimensions of the Machine: 2300 x 5400 x 3050 mm

  • D.O.T. Marking: Optional

  • Scribing Tool: On One side

  • Chip Conveyor: Standard

Request a Quote