Spindle Moulder T 120 – TL 120
| T 120 | TL120 | |
| Worktop dimensions | mm 920×1100 | |
| Available shaft diameters | mm 920×1100 | mm 920×1100 |
| Max. opening size on the table | 350×80 mm | 350×80 mm |
| Shaft vertical stroke (Ø 30-35) | mm140 | mm140 |
| Vertical shaft stroke (Ø 40-50) | mm180 | mm180 |
| Worktop height | mm 890 | mm 890 |
| Shaft speed | rpm 2500/4200/6000/8000/10000 | rpm 2500/4200/6000/8000/10000 |
| Motor power | HP 5.5 | HP 5.5 |
| Machine weight | kg 590 | kg 680 |
- Spindle moulder cap
- 2 extractor hoods ( 1 x ø 80 mm, 1 x ø 120 mm)
- Manual star-delta starter
- Spindle moulder cap
- Spindle moulder guide with linear movement by means of handwheels and movements displayed by mechanical decimal numerators.
- Sliding on recirculating ball linear guides.
- 2 extractor hoods ( 1 x ø 80 mm, 1 x ø 120 mm)
- CE type profile protection
- Contour CE type protection
- Automatic delta star start
- Self-braking motor
- Electric predisposition for driver
- Numerical display for lifting the mast
- LED speed display with light diodes
- CE type protections
ACCESSORIES ON REQUEST
45° tilting spindle moulder with electronic digital angle reading display
Spindle moulder guide with linear movement by means of handwheels and movements displayed by mechanical decimal numerators. Sliding on recirculating ball linear guides. (standard version)
7.5 HP motor
10 HP Motor
Engine HP 12
Automatic star delta start (for standard version)
Surcharge for self-braking motor with brake release (standard version)
Motor protection and emergency mushroom (standard version)
Rotation reversal (standard version)
Rotation reversal (CE version)
Electronic digital display shaft height
Digital mechanical shaft height display (standard version)
Light-emitting diode speed display (standard version)
Spindle moulder shaft with slot (only available for standard version)
MK4 interchangeable shaft
Extra top shaft for MK4
Aluminum guide for “lamellar” type boot
Aluminum rail for headset
CE type profile moulder protection (standard version)
TAPOA type moulding shaft protection (standard version)
Spindle moulder hood exclusion by means of a folding support
Tenonare trolley mod. T
Side extension plates in sheet metal (total length 2200 mm) and front extension (for T 120)
Console control panel
Hanging control panel
Motorized shaft lifting with electronic positioner: axis calibration function; encoder reading system; Ability to set 0 in any shaft position
Motorized shaft tilt with electronic positioner: axis calibration function; Encoder reading system
Shaft lifting and tilting with movements managed by the VK3 control panel with manual and automatic function and the possibility of incremental movements: encoder reading system; relative position function; Automatic axis calibration
Shaft speed managed by inverter: variable speed from 800 – 10,000 rpm; engine start and stop managed by inverter; In the presence of control, the speed is managed by it