Spindle Moulder with Side Carriage for Tenonare TT 120 – TTL 120
| TT 120 | TTL 120 | |
| Fixed worktop dimensions | mm 745×1100 | 920×1700 mm |
| Available shaft diameters | mm 30-35-40-50 | mm 30-35-40-50 |
| Max. opening size on the table | 350×80 mm | 350×80 mm |
| Shaft vertical stroke (Ø 30-35) | mm 140 | mm 140 |
| Vertical shaft stroke (Ø 40-50) | mm180 | mm180 |
| Worktop height | mm 890 | mm 890 |
| Shaft speed | rpm 2500/4200/6000/8000/10000 | rpm 2500/4200/6000/8000/10000 |
| Motor power | HP 7.5 | HP 7.5 |
| Machine weight | kg 690 | kg 820 |
- Profile spindle moulder cap with ø 120 mm hood
- Tenoning spindle moulder cap with hood ø 120 mm
- Extraction hood on the back of the machine ø 80 mm
- Telescopic extension guide on the carriage with 2 stops
- Eccentric Presser
- Manual star-delta starter
- Revolver for workpiece length reference
- Adjustable front bar for large workpieces (for TTL 120)
- Profile spindle moulder cap with ø 120 mm hood
- Spindle moulder guide with linear movement by means of handwheels and movements displayed by mechanical decimal numerators.
- Sliding on recirculating ball linear guides.
- Tenoning spindle moulder cap with hood ø 120 mm
- Extraction hood on the back of the machine ø 80 mm
- CE type profile protection
- Contour CE type protection
- Telescopic extension guide on the carriage with 2 stops
- Eccentric Presser
- Automatic delta star start
- Self-braking motor
- Electric predisposition for driver
- Numerical display for lifting the mast
- LED speed display with light diodes
- CE type protections
- Revolver for workpiece length reference
- Adjustable front bar for large workpieces (for TTL 120)
ACCESSORIES ON REQUEST
45° tilting spindle moulder with electronic digital angle reading display
Spindle moulder guide with linear movement by means of handwheels and movements displayed by mechanical decimal numerators. Sliding on recirculating ball linear guides. (standard version)
10 HP Motor
Engine HP 12
Automatic delta star start
Surcharge for self-braking motor with brake release (standard version)
Motor protection and emergency mushroom (standard version)
Rotation reversal (standard version)
Rotation reversal (CE version)
Electronic digital display shaft height
Digital mechanical shaft height display (standard version)
Light-emitting diode speed display (standard version)
MK4 interchangeable shaft
Extra top shaft for MK4
Aluminum guide for “lamellar” type boot
Aluminum rail for headset
CE type spindle moulder protection
TAPOA type moulding shaft protection
Spindle moulder hood exclusion by means of a folding support
Console control panel
Hanging control panel
Motorized shaft lifting with electronic positioner: axis calibration function; encoder reading system; Ability to set 0 in any shaft position
Motorized shaft tilt with electronic positioner: axis calibration function; Encoder reading system
Shaft lifting and tilting with movements managed by the VK3 control panel with manual and automatic function and the possibility of incremental movements: encoder reading system; Automatic axis calibration
Shaft speed managed by inverter: variable speed from 800 – 10,000 rpm; engine start and stop managed by inverter; In the presence of control, the speed is managed by it